If you only have one drive, then you can plug the CAT-5 cable directly. These are needed to use more than one floppy drive. The CAT5 splitter devices are not included. Please use standard 8-pin cabling, do not use crossover or patch cable. We will email the download location.Įthernet/CAT5 cables are not included. The network transfer software will be downloaded upon purchase. If you do not have a serial port, there is an included USB-to-serial adapter (not shown). This serial cable plugs into the 9-pin RS-232 port on your computer, usually designated as COM1. The plug is american standard and may need an adapter (not included). The power supply is included and is compatible from 100V up to 240V. This plugs into your Windows computer through the 9-pin cable shown below. Up to 32 drives may be controlled from each network converter box, and you may control two converter boxes from the software. The actual USB Floppy device(s) must be ordered separate.
You only need to order one per host computer. The following items are part of the network converter order. It may write or delete, but may not transfer files back to the host computer (as of software version 2.0). PLEASE NOTE: The standard USB Floppy device is not compatible with this system, you must use a network capable device.ĪLSO NOTE: The system is for one-way communication with the floppy drives only. Ethernet junction boxes or splitters for each additional USB Floppy device.One or more network capable USB Floppy devices.To use this system, you must have the following: The system is expandable up to 64 devices. You may add or delete files on each device or every device. The transfer software allows individual or combined control of 32 floppy drives from one serial line. It does not need a USB stick although each floppy may still accept USB sticks as usual. The USB Floppy Network system is designed to download data to many floppy emulators from one central computer. Floppy Disk Emulator Network System Description and Instructions
0 kommentar(er)
